Direct vent or vent-free propane
Eight of the ten are direct vent. They pull combustion air from outside and send exhaust back out through a coaxial pipe in the wall or roof, so the firebox is sealed from room air. The Tahoe Premium 48 can vent from the top or the rear.
The Boulevard 48 and Vail 32 are vent-free: they need no pipe and run at very high efficiency, with the Vail listed at 32,000 BTU. Vent-free heaters are banned or limited in some states and cities, and many codes keep them out of bedrooms and bathrooms.
Picking a propane fireplace by size and heat
Match the BTU rating of a propane fireplace to the space. The Tahoe 36 Premium see-through is rated at 35,000 BTU and the Elevation X models list up to 45,000 BTU. Empire lists the Tahoe models at 60 to 80% efficiency and describes them as suitable for primary heat. Smaller rooms do better with a model you can turn down.
Depth matters for the wall. The Tahoe Deluxe needs just 16 inches, while the Tahoe Premium 48 is 20 inches deep. The Elevation X 42 measures 44.75 inches wide by 48 inches tall.
Ignition and power outages
Millivolt ignition uses a standing pilot that makes its own small current, so a propane fireplace with it lights and runs without house power. The Napoleon Ascent 42 is millivolt, and the Tahoe 36 Deluxe and the Vail come in millivolt or intermittent pilot versions.
Intermittent pilot and electronic ignition light the pilot only when needed, which saves fuel. The Elevation X uses electronic ignition with a remote, and the Boulevard 48 uses intermittent pilot. If outages are common where you live, check each listing for battery backup.
Fuel, tanks and conversion
A propane gas fireplace connects to an outdoor tank or a building's propane line through a regulator. One gallon of propane holds about 91,500 BTU, so a 35,000 BTU unit running on high burns a little under 0.4 gallons an hour.
Several models, including the Ascent 42, Elevation X and Vail, are sold in natural gas or propane versions. Order the propane build, since converting later needs the manufacturer's kit and a qualified technician, and some models cannot be converted at all.
Installation and safety for a propane fireplace
Have a certified gas technician or NFI-certified hearth installer set the unit, run the line and leak test every joint. The installer also confirms vent termination clearances from windows, doors and decks, which the manual spells out for each propane fireplace.
Fit carbon monoxide detectors near any gas appliance, and book yearly service to clean the burner and check the glass gasket. See all fireplaces, compare ventless gas fireplaces and gas fireplace inserts, or browse double-sided fireplaces.