Two kinds of metal greenhouse kit
An aluminum greenhouse kit is a rigid building. The frame carries twin-wall polycarbonate panels, a door that slides or swings, roof vents and often gutters, and it can stand year round once anchored. Expect to pay roughly $630 to $5,500 here.
A steel frame greenhouse is the budget metal greenhouse kit, a hoop house of galvanized tubes under a flexible polyethylene (PE) film, with roll-up windows and a zippered door. At $214 to $338, it is the cheapest way to cover a large growing area, though the cover is the part that wears out.
Aluminum frames with polycarbonate panels
Aluminum does not rust, stays light and holds panels tightly. The SAKSBY 10x14 ft model uses a 1.5mm aluminum frame with 6mm twin-wall panels and lists a 70 mph wind rating and a 30 psf snow load. The 12x12 ft T-shape has strengthened corners and 6mm double-wall panels.
For a smaller yard, the 6x12 ft SAK69048 has a rooftop vent and sliding door, and the two 8x12 ft kits offer double swing doors or double sliding doors with a 6mm or 8mm panel choice. Compare panels in polycarbonate greenhouse kits.
Galvanized steel hoop houses with PE covers
The HomePacific steel kits use galvanized tubes that resist chipping and peeling, with slant braces, guy ropes and ground stakes for stability. The white 11.5 x 10 ft model has a 140 GSM cover with a reinforcement grid that lets in about 85% of sunlight, and the 19.5 x 9.8 ft tunnel has eight roll-up mesh windows.
The 7 x 4.7 ft unit adds two-tier wire shelving rated 33 lb per tier, handy on a patio. White covers diffuse light for seedlings, while green covers block more direct sun.
Which metal greenhouse kit fits your plans
Choose a metal greenhouse kit by how long you want it to last and when you grow. A PE hoop house works for starting seeds in spring, hardening off transplants and stretching the fall season, and many growers take the cover down for winter. Aluminum and polycarbonate is the better buy for year-round growing, cold climates or a heated space, because rigid panels insulate and shed snow. Long, narrow plans such as the 14.5 x 6.3 ft tunnel suit rows of vegetables. For stand-up room, see walk-in greenhouses.
Anchoring and setup
Wind is the biggest risk to any metal greenhouse kit, especially light steel frames with film covers. The 14.5 x 6.3 ft model has 5.9 inch cover edges meant to be buried in soil, and the 19.5 x 9.8 ft model comes with screw ground stakes. HomePacific advises adding your own reinforcement before storms.
Bolt aluminum kits to a concrete pad, pavers on a compacted base or a timber frame. Leave space on every side so doors and vents open fully. See every frame type in greenhouse kits.